Specifications
|
Model |
AP-12SR (This Model) |
HW-10ASY (for Comparison) |
Manual |
AP-12SR Manual |
HW-10ASY Manual |
Style |
Overhead |
Overhead |
Lock Release |
Single Point Release |
Single Point Release |
Warranty |
3 Years (36 Months) |
3 Years (36 Months) |
Lifting Capacity |
12,000 LB |
10,000 LB |
Overall Height |
165" |
141 3/16" |
Overall Width |
149" |
139 1/8" (standard) 140 15/32" (post rotated) |
Maximum Lift height with Truck Adapters |
79" |
81" |
Maximum Lift height without Truck Adapters |
70" |
75" |
Minimum Height of Adjustable Pads from Ground |
4" |
4" |
Drive Through Width (Carriage to Carriage) |
109" |
104" (symmetric) 97" (asymmetric) |
Column to Column Width |
123" |
113" (symmetric) 107" (asymmetric) |
Column Cross Section |
14 3/8"L x 7 13/16"W |
11"L x 7"W |
Driving Mode |
Dual hydraulic cylinders, direct drive |
Dual hydraulic cylinders, chain drive |
Motor |
220V Single Phase 3HP with Inverter Motor (recommend a 30A breaker) |
220V Single Phase 3HP 10A (recommend a 30A breaker) |
Hydraulic Oil |
3-5 gallons AW32/AW46 (Not Included) |
3-5 gallons AW32/AW46 (Not Included) |
Time to full rise |
75 seconds |
50 seconds |
Shipping Weight |
2500 LB |
1470 LB and 120 LB |
Shipping package size |
117"L x 22"W x 50"H |
- 113"L x 22"W x 40"H (Car Lift)
- 38"L x 17"W x 14"H (2ft Height Extension Crate)
|
Arm Assembly |
Symmetrical Arm Assembly |
Combo (Symmetrical and Asymmetrical) Arm Assembly |
Front Arms |
Straight Front 3 Stage reach from 37 1/2" to 72 3/16" |
Straight Front 3 Stage reach from 22 7/8" to 42 5/8" |
Back Arms |
Straight Rear 3 Stage reach from 37 1/2" to 72 3/16" |
Straight Rear 2 Stage reach from 33 5/8" to 52 7/8" |
Column Steel Thickness |
1/4" |
13/64" |
Carriage Steel Thickness |
1/4" |
15/64" |
Carriage Yoke Thickness |
3/4" |
9/16" |
Arm Steel Thickness |
5/16" |
15/64" |
Base Plate Steel Thickness |
13/16" |
5/8" |
Truck Adapters (Height Extensions) |
Two Sets: 3" Tall and 6" Tall |
One Set: 4" Tall |
Other Parts Included |
- 4 adjustable screw pads
- 10 anchor bolts
- 10 shims
|
- 4 pieces of adjustable screw pads
- 10 anchor bolts
- 10 shims
- 2 tool trays
- 2 toe guards
|
Optional Parts |
2 3/4" and 6" Tall Truck Adapters |
Concrete Requirement |
6" thick at 3500 psi reinforced with fiberglass or steel (4" thick for vehicles 9000LB and below) |
Model |
AP-12SR (This Model) |
HW-10ASY (for Comparison) |